DARWIN AI Blossom detection
The next generation of blossom thinning
Mechanical blossom thinning
Mechanical thinning with Darwin is safer and more efficient than chemical thinning and enables targeted hand thinning for excellent fruit size and quality.
With chemical thinning, the effort cannot be calculated; success depends on timing, weather and other unpredictable factors. Second, third or even fourth applications are often needed to reach the goal.
With Darwin, the result is immediately visible. In addition, early Darwin thinning counteracts alternate bearing, an effect that can no longer be achieved with later chemical thinning.
Subsequent hand thinning becomes more efficient because the focus is on quality rather than on removing a large quantity. This makes good fruit quality and consistent annual yields possible. Constantly rising labour and harvesting costs can be countered with stable thinning, and unit costs can be reduced permanently.
Darwin is mounted on the tractor’s front hydraulics or via a front adapter plate if the tractor has no 3-point front hydraulics. Hydraulic adjustment of the spindle inclination allows adaptation to tree shape and terrain.
The Darwin spindle is guided close along the tree rows and, depending on the timing, knocks off buds, blossom clusters or individual blossoms.
Darwin was developed from practical experience and has been continuously optimised and adapted to customer requirements over 25 years of development. Today Darwin is a patented, mature system that will help you, too, to produce quality and secure your yields year after year!
New
Camera-based blossom detection sets the speed of the thinning spindle automatically, co-developed with EdenCore.
Ensure consistent yields with the best fruit quality!
For mounting without front hydraulics. Holes for common tractors are provided; the mounting plate can be adapted if necessary.
For mounting on the tractor's front hydraulics (3-point), categories I and II.
The spindle speed can be adjusted continuously from the driver's seat using the +/- buttons on the control panel and optimally matched to the driving speed. The set spindle speed can be read precisely and is automatically kept constant, even when the engine speed of the carrier vehicle is increased or reduced. The ESC button stops the spindle at any time in order to exclude trees with weaker blossom set or alternating trees from thinning.
| Feature | Unit | Darwin 150 | Darwin 200 | Darwin 230 | Darwin 250 | Darwin 300 |
|---|---|---|---|---|---|---|
| Working height | mm | 1,475 | 1,935 | 2,245 | 2,395 | 2,850 |
| Driving speed | km/h | 7 to 15 | ||||
| Spindle speed | rpm | 150 to 450 | ||||
| Area output | ha/h | 1.5 to 2.5 | ||||
| Cord length | mm | 600 | ||||
| Number of cord strips | 18 | 24 | 30 | 30 | 36 | |
| Dimensions W/D/H | mm | 1,820/1,400/800 | 2,285/1,400/800 | 2,580/1,400/800 | 2,740/1,400/800 | 3,200/1,400/800 |
| Weight | kg | 130 | 138 | 142 | 145 | 152 |
| Required oil flow | l/min | 25 | ||||
| Max. operating pressure | bar | 210 | ||||
| Mounting | Front mounting, right side* | |||||
| Side shift, manual | mm | 595 | ||||
| Side shift, hydraulic | mm | 400 / 300 | ||||
* with and without front hydraulics or forklift mounting
We are happy to advise you personally, by phone or email.
Your contact
Jürgen Schmid
Sales Manager
Service and spare parts: support@fruit-tec.com
The next generation of blossom thinning
Mechanical blossom thinning
External oil supply